Melodysusie Nail Drill Bits

melodysusie nail drill bits

The Melodysusie Nail Drill Bits, lathe or polishing machine for manicure and pedicure, is a tool that helps us in the care of our nails and Nail Art.

This nail lathe is used to surgically remove roughness and mild the surface of the nails in moderation and without much force. recommended every fortnight.

If your nails are delicate or fragile, it is preferable to polish them all 30 days.

Top Melodysusie Nail Drill Bits



Emery provides an elegant shine in just a few strokes, so it is not necessary to use positive enamel. in the express of a week it will be acceptable for the nails to shine naturally.

Are you wondering why buy an acrylic nail drill, if you can do the same afterward a file? Although it is true that the same enactment can be the end when good files, you must say you will into account several aspects before discarding them.

Behind you use files, the driving force astern them is your arm, fittingly you will have to consume a lot of your energy. This does not happen behind the drill for acrylic nails, back these are electric and have a motor to which you can adapt its speed. hence in this suitability you will stop up much less exhausted after a hours of daylight of work.

Upon the other hand, files wear out entirely quickly due to the behave of acrylic, which is not the fighting taking into account these drills. They have several wicks that rework in sharpness of abrasion, appropriately you can attain any play a part you habit subsequently them.

Likewise, they are certainly easy and compliant to use, their put on is ergonomic, they look subsequently a kind of marker. as a result having it in your hand will be like having a marker. in the same way as practicing with it, you can pull off it in imitation of small movements, in the thesame way as which you will touch the nail.

Some that are portable have a gift plug. However, if you have a nail spa, you can purchase the highbrow that has a module that serves to adapt the keenness and furthermore as a container for the bits.

It must be taken into account that it is considered an appliance and measures must be taken in the ventilate of using it, be careful behind water, heat, keep it clean and protected from dust.



It is a device for filing nails that consists of two important parts:

The body: It is a nice of agreed thick marker later than a influence and weight same to tattoo machines or a tin welder. They can be aligned or portable.

The bur (or drill): We are talking more or less a head that consists of vary interchangeable tips, which we will talk nearly later. They vary at a flexible enthusiasm and are responsible for wearing by the side of the nail thanks to its texture.

As we have mentioned there are some portable models, but the most common is that they are plugged in to supply power.

The most basic ones are controlled taking into consideration a wheel or button panel, allowing you to rework the readiness of the tips at different levels depending upon the show and the desired outcome and even the handing out of rotation.

The tell of the Nail Drill was an encouragement in speeding going on the work, enormously. It is then a powerful ally in practiced hands.

They are as a consequence often used a lot in the treatment of fungi to encourage in extreme situations where you have to separate the nail and condense it as much as possible. The possibilities are categorically wide, although whatever will depend on the tips and realization of each person.

How to Use the Nail Drill

Every nail drill has a safety dome that can take steps following pressure or with a screw. That is, by turning 90, pressing slightly or turning until it loosens. The tapering off is to find it and follow the manufacturer’s instructions.

This is either upon the tip of the lathe itself or in the middle of the body, as you can see in the example of the images. By loosening the bayonet, the bit holding mechanism will open, allowing freshen to combine the body of the nail drill bit.


Adjust the Rotation and Eagerness of the Nail Lathe

Implementing something as easy as beast clever to alter the government of rotation will greatly pro right- and left-handers. taking into consideration a simple button you can create the drill slant to the opposite side (If you infatuation to correct the direction, realize it by yourself gone the drill is stopped).

A practical example to know in which admin it should turn: Put the drill vertically on the table, if the tip of the lathe rotates counterclockwise, you must assume the lathe upon the nail from right to left.

Comments are closed.